EP802 TM Model Visual Checks:

  1. Verify Main Box and Isngle printer boxes are labelled according to requirements. 
  2. Open printer box 
  3. Check hardware contents are per part number description.
  4. Check printer has no physical damage or bent brackets.
  5. Check to ensure locating/fixing screw points on all sides and bottom of chassis have threads.
  6. Check Feed button label is Blue in colour (not Black)
  7. Check if Self-Test Ticket is located in the units box or in printer.
  8. Check serial number starts with MS20xxxxxxxx “20” means year 2020 – check this against the serial number label on the side of the printer matches.
  9. Check Firmware version is as per part number description.
  10. Check Model is TM
  11. Print Density is 130%
  12. Ensure Peripheral settings are as per example below. Especially Exit Paper, Anti Jam Enable and Anti Pull Enable.