To change from POL to EUR currency they will need to connect to the Maintenance port at the rear of the MRX and use the attached downloader to download the EUR template. After the download it may take some time for each module to update so wait until all LEDs turn green again.
We don’t have any sample code but they can use the MRX Host Simulator; they should be able to see what is happening with that. Once you start the HOST simulator it should show #1 Power On in SST2 (just above the log window) and all LED lights should be green.
Send the commands from the HOST simulator in the order below, making sure the SST2 status is correct at each step as below.
- RESET à #2 Initializing à #7 Waiting for command
- UNIT_INFO
- DENOMI_INFO
- SET_DATE (important for analysis)
- SET_DENOM à #8 Idle
If all worked correctly then you should have four windows open. Sending CASH_IN command should open the shutter with a loud click.